SAVE MONEY ON YOUR OXYGEN BILLS…..
USING THE VETROSON® OXY-GEN™ SYSTEMS!
(COSTS PENNIES PER DAY VS. DOLLARS PER DAY FOR OXYGEN)
What is it?
Each Oxy-Gen™ System is a combination of a generator and receiver tank with interfaces that connect the generator to the receiver tank and the receiver tank to the central oxygen system manifold. The system can produce a minimum of 14,000 liters of oxygen in a 24 hour period delivering either 20 or 50 PSI at a flow rate of 10-30 LPM depending on which model is used.
Why have continuous flow?
It is necessary to have all the VETROSON® components to insure adequate flow and pressure to handle a veterinary hospital's total oxygen requirements-anesthesia machines, ventilators, a Snyder ICU or Oxygen Cage Door units. With continuous flow one is assured accuracy in LPM delivery.
Why a Receiver Tank?
The receiver tank holds 30 liters of oxygen It is designed to handle multiple flushes for an oxygen purge during anesthesia and filling of ICU's without throwing the system off balance. This tank is not for storage. It is continually releasing a small amount of oxygen.
What isn’t it?
It is not a concentrator. Concentrators are generally used in a 1 to 1 situation delivering up to 5 PSI, which is not sufficient pressure to connect to a manifold and handle multiple machine requirements. It is not used to fill oxygen "H" tanks.
You mention 20-50 PSI units at 10-30 LPM. Exactly what models are available, what are the
costs, and which model would I use?
Please refer to the chart at the top of this page.
Calculating Requirements
Use 1 LPM for each anesthesia machine in use, 3-5 LPM for a Snyder ICU or an Oxygen Cage Door, and 4 LPM for each ventilator. If the practice has a ventilator, a 50 PSI unit must be purchased. These figures vary slightly per individual animal's anesthesia requirements. Match your LPM requirements with LPM supplied. Leave a little room for an additional anesthesia machine or an ICU unit. The cost per LPM will be the lowest for any oxygen generator available today.
What are the electrical requirements, size, and weight of the units?
Installation
Easy to install. Attach the short hose on the receiver tank to the generator and the long hose to the oxygen system manifold. Plug the electrical cord into a nearby dedicated receptacle.
Back Up
Utilize your present system as back up in the event of electrical failure. In this instance just turn the Oxy-Gen™ System off and the O2 tank on. |
