Electrosurgery Product Line

VETROSON® V-10 BI-POLAR ELECTROSURGERY UNIT
Low Impedance High Frequency Solid State Circuitry

FOUR TREATMENT MODES:
1) “Normal” or Fully Rectified
2) “Fine” or Filtered Fully Rectified
3) “Coagulation” or Partially Rectified
4) “Spark” or Fulguration

44-400

VETROSON® V-10 BI-POLAR ELECTROSURGICAL UNIT

BI-POLAR CAPABILITIES / 140 WATTS
5 YEAR WARRANTY
2 WEEK TRIAL PERIOD

Both handpieces activated simultaneously when the footpedal is depressed. No need to change electrodes or settings in the middle of surgery. The basic unit includes black surgical and white coagulation handpieces, a red ground plate, eight commonly used electrodes, an electrode block…all autoclavable 20 minutes at 250°F.

The V-10 is ready the second it is turned on and is 100% solid state. There are no vacuum tubes to break or burn out or to keep the Veterinarian waiting while they warm up.

THE V-10 CONSTANTLY ADJUSTS THE POWER THE SECOND IT IS TURNED ON
Soft tissue varies in electrical resistance. The deeper the tissue, the greater the electrical load it puts on the electrosurgical unit. The V-10 features special low-impedance circuitry that acts like a car’s automatic transmission. Generally the power has to be set only once for the case at hand. Then the instrument’s circuitry takes over, automatically adjusting the power to compensate for tissue variations at the operative site. Therefore, cutting efficiency remains constant throughout the
procedure… when the electrode penetrates into highly vascularized tissue in the middle of the incision.

The V-10 IS DESIGNED FOR TODAY’S ASEPSIS CONCERNS
Both the Surgery and Coagulation Handpieces are activated by depressing the foot pedal assuring sterility throughout the operation. The Handpieces are made out of inert, high-temperature Delrin resin that stands up to steam autoclaving for 20 minutes at 250 degrees F. The electrodes, ground plate and cord may be autoclaved.